Help and guidance
Frequently asked questions
Clear answers to common questions about choosing a service, what it covers and what to expect.
Residential surveys
When should I arrange a pre-purchase survey?
Usually once your offer has been accepted, and early enough for the findings to inform further investigation, quotations or negotiations before you become legally committed to the purchase.
How do I choose between a Level 2 and Level 3 survey?
The choice depends on the property’s age, construction, condition, alterations and complexity, as well as your concerns and plans. A Level 2 is suited to conventionally constructed homes that appear to be in reasonable condition. A Level 3 gives a more detailed account and is suited to older, larger, altered, unusual or visibly defective properties. We can discuss the property and help you decide.
Are all cracks in a house serious?
No. Some cracking is limited to finishes or may be historic. Pattern, location, associated distortion, construction and nearby alterations all matter; a photograph or width alone cannot establish the cause.
Does a Level 3 survey automatically include invasive investigation?
No. A Level 3 is a detailed visual inspection. Opening-up or other intrusive work is not automatic; it requires separate discussion, appropriate consent and a suitable scope. If the findings indicate that more evidence is needed, the report explains what further investigation may help.
Will a Level 3 survey include a market valuation?
No. Mason & Oak’s Level 3 Building Survey does not include a market valuation. A mortgage valuation is a separate service prepared for the lender.
Does a Level 3 Building Survey include repair-cost guidance?
A standard Level 3 Building Survey includes indicative repair-cost guidance where reasonably possible. These broad allowances help you understand potential expenditure; they are not contractor quotations or a measured schedule of works. Where a defect’s extent is uncertain, further investigation or contractor quotations may be needed before a reliable allowance can be given. Actual costs can vary with the work, specification, access and what is found once repairs begin.
How much will it cost to repair a crack?
The cost depends on the cause and extent of the cracking and the work needed, so it cannot be priced reliably from a photograph or crack width alone. A standard Level 3 report includes indicative repair-cost guidance where reasonably possible. For cracking, a reliable allowance may depend on establishing the cause and extent first; any allowance is a broad guide, not a contractor quotation or measured schedule of works, and cannot be given against every finding.
When will I receive my residential survey report?
Reports are normally delivered within four working days of inspection. We provide same-day feedback after the inspection and discuss expected timing with you.
Does a Level 3 survey automatically include a focused damp investigation?
No. A Level 3 reports on visible moisture-related concerns within the agreed survey and recommends further damp investigation when justified. A focused Independent Damp Survey is a separate service and is not automatically included.
Can I ask questions after I receive my report?
Yes. For purchase instructions, you can speak directly with Carl to clarify the report and discuss questions as you progress through the purchase.
Damp and moisture investigations
Can a moisture meter prove rising damp?
No. A meter helps identify and compare readings, but salts, metal fixings, plaster and other materials can affect them. The cause needs to be considered alongside the building’s construction, visible symptoms, ventilation, maintenance and external conditions.
What does an Independent Damp Survey include?
It is a focused investigation of the moisture concerns discussed with you. We consider likely sources, the building and relevant previous alterations and repairs, then provide a written, illustrated report with likely causes, uncertainty and prioritised recommendations. Further investigation is identified where it may help.
Do you sell damp-proofing or remedial treatments?
No. We provide independent assessment and advice; we do not sell remedial damp treatments.
Does a damp survey automatically include testing or monitoring?
No. The focused investigation is agreed around the concerns and property. Invasive testing, laboratory analysis, monitoring or thermal imaging are not routine inclusions; further investigation is recommended where justified and agreed.
Historic buildings and heritage projects
What is a Historic Building Survey?
It is a fully written, illustrated, property-specific survey for older, traditional and historic buildings. It considers construction, historical development, condition, previous alterations, moisture movement and repair approaches suited to the fabric. Inspection and research are shaped around the building and your concerns and plans.
What is the difference between a Statement of Significance and a Heritage Impact Assessment?
A Statement of Significance explains what is significant about a building or place and why. A Heritage Impact Assessment considers how defined proposed changes may affect that significance. Each is a separate heritage consultancy service, and the suitable scope depends on the project and any relevant authority requirements.
What is Historic Building Recording?
It documents and interprets a building or part of it at an agreed point in time, often before change affects its historic fabric. The usual output is a written and photographic record. Drawings, scanning and other methods depend on the project brief and agreed scope.
What should I send when asking about a heritage project?
Send the address or site details, your plans or a short description of the proposed work, any existing heritage information and relevant council correspondence or a brief. We can use these to discuss a suitable scope and next step.
Still deciding what you need?
Tell us about the property or project and what you want to understand. We can discuss the relevant service and a suitable next step.